I have three printers one is a nice little Hictop Pruser i3 clone, like in the picture below. It’s in my bedroom, well was in my bedroom because I wanted to move it to the living room where it might be better appreciated. 3D printers should be on view to all and sundry because they … More 3C Printer Enclosure
Now I have finished writing I have a little more time to put towards other projects. You might think that I have many important things to do and you would be right. I want to get into Blender sculpting that looks really interesting. Then there’s my Flsun cube printer that I want to turn into … More Duel extruder on the cheap
I have written a few books before, although they were about a completely different subject. But that for me is the reason you write a book. The subject must inspire you and it must leave you wanting to know more about it. If you write a book about something you better make sure you’re prepared … More The books I wrote about this 3D printing malarkey
First off; I have nothing to do with the company called “Rigid ink” they have not asked me to write a review nor have they paid me to write this. While I’m not obligated to share this fact I know that sometimes people are overly suspicious about off-hand positive reviews. The reason I am writing … More Reviews – Rigid.ink monthly filament subscription
Problem: Broken arm – GHD straighteners Cause: Messy bedroom walking about without due care and attention. I would guess late and probably rushing about getting ready to go out. It’s text book stuff. As you can see a less than clean break, not sure what the material is that’s used to make these. More importantly … More Print my life – GHD Straighteners
As you are aware, I think everyone should have a 3D printer. At the same time, I believe that 3D printers are worth more than just being used for printing objects from Thingiverse, MyMiniFactory or Yeggi. Don’t get me wrong, these sites are amazing and worth the time to go in and look around. But … More Print my life!
I wanted to create a small plinth with the name of the website embossed on the front. I wanted to have something that I could use when I wanted to take a picture on a print and post it to my media sites. I designed it in Tinkercad, then tried to print it. I wanted … More Prints warping on my Delta
Delta End Stops I think that printers “End Stops” are the second most important thing on a 3D printer. Not sure what the first most important thing is, but end stops, are definitely the second most important thing. End stops, tell the printer what it’s working dimensions are going to be. Every time you turn … More 3D printer – End Stops
This caught me a little by surprise. The RAMPS board does its thing, tucked away, as it is, in the bowels of my Delta printer. Since I’ve had this printer, it has always had an issue with being noisy. I thought it would be cool to move it to its own box located somewhere else, … More Stepper Driver Problem, and Resolution
Can You earn money from 3D Printing? I have often wondered, if you can earn money from 3D printing. In this post, I will offer some ways in which you might be able to make some money. How much? Well I can’t say, it’s up to you, and how far you are prepared to go … More Can You earn money from 3D Printing?